Minimum order quantity：300

{there are the following precautions for inflatable products in daily use}

1. Keep away from sharp things, such as thorny plants or sharp stones and blades.

2. When in use, the bottom cloth shall be laid under the inflatable product to prevent it from being pierced by sundries.

3. Do not use it as a life buoy.

4. Keep away from flames or hot objects.

5. When the temperature is high, do not put the inflatable product that expands and closes the valve in the car or tent.

6. Do not touch sunscreen or alkaline drugs.

7. Keep out of the reach of pets.

8. The air nozzle is hard and should be avoided during rest.

9. Do not expose to the sun for a long time. Ultraviolet light will slowly damage the material on its surface.

How to repair inflatable products

A. Repair needle eye:

If your inflatable product is accidentally pierced with one or more small needle holes by a needle or wood thorn, it is the easiest to repair:

1. Deflate the product and cover the air nozzle to reduce the gas flow in the bed;

2. Take out the glue from the repair bag and put a drop of glue on the eye of the needle;

3. If the eye of the needle is large, take a toothpick, dip some glue with the tip of the toothpick, apply it into the damaged eye of the needle, and then coat the mouth of the eye of the needle with glue;

4. After the repair is completed, wait four hours before inflating.

B. Repair scratches or burns

If your product is accidentally cut by a knife or burned, please don't panic. You can repair it in the following order:

1. Deflate the product and cover the air nozzle to reduce the gas flow in the bed;

2. Find out the patch material in the repair package and cut a piece to cover the crack;

3. Apply glue to the damaged part, press the patch, and stick the edge seam of the patch with glue;

4. Apply pressure to ensure that there is no gap on the rubber surface, and press it firmly with smooth and heavy objects;

5. Wait eight hours before inflating and the repair is completed.

C. Suede repair

1. Carefully clean the repair area;

2. After drying, take out the patch, cut it, cover it on the damaged surface, and allow more around;

3. Apply a layer of glue on the patch and damaged surface, and stick the edge seam of the patch with glue to ensure complete sealing;

4. Press it firmly with smooth and heavy objects;

5. Press it with heavy objects, inflate it after 24 hours, and repair it.

D. Other matters:

1. Remember not to inflate too full (especially in summer) and do not exercise too violently on the product, otherwise the tension belt in the product will be overloaded and broken, resulting in bulging and irreparable products, which can only be scrapped.

2. Repair glue is a chemical. Do not touch eyes or swallow.